Country guide

How do public tenders work in Finland?

Finnish public buyers, including state agencies, municipalities, the wellbeing services counties and public companies, must announce every contract above the national thresholds in Hilma, the free national notice service, and above the EU thresholds also on TED. The Procurement Act (hankintalaki) was amended in 2026, with changes phased in from June 2026. Most tenders are submitted electronically in Finnish or Swedish through platforms such as Mercell's Tarjouspalvelu or Cloudia.

TenderRenderAI for tenders

At a glance

Central portal
Hilma

Thresholds

Supplies and services, central government authorities (EU threshold)€ 140.000
Supplies and services, other contracting authorities incl. municipalities and wellbeing services counties (EU threshold)€ 216.000
Works contracts and concessions (EU threshold)€ 5.404.000
Supplies, services and design contests (national threshold)€ 60.000
Works contracts (national threshold)€ 150.000
Social and health services (national threshold)€ 400.000
Other specific services (national threshold)€ 300.000
Supplies and services, utilities (EU threshold)€ 432.000

Law and buyers

Public procurement in Finland is governed by Laki julkisista hankinnoista ja käyttöoikeussopimuksista (the Act on Public Procurement and Concession Contracts, 1397/2016), which implements the EU directives, and a separate act for utilities (1398/2016). The Act also sets national thresholds, so contracts between those and the EU thresholds follow lighter national rules. Buyers include state agencies, municipalities, the wellbeing services counties (hyvinvointialueet) responsible for health and social services, and public companies. Hansel is the central purchasing body for central government, and several regional purchasing companies serve municipalities. KKV (the Finnish Competition and Consumer Authority) supervises compliance, and the Ministry of Economic Affairs and Employment is responsible for the legislation. Amendments adopted in June 2026 enter into force in stages between 2026 and 2029.[1][3][14][18]

Where tenders are published

Every procurement above the national thresholds must be announced in Hilma (hankintailmoitukset.fi), the national notice service maintained for the Ministry of Economic Affairs and Employment. Hilma is free to search, and suppliers can set up free search alerts. Notices above the EU thresholds are forwarded automatically to TED. The tender documents and the submission are usually handled in a separate e-tendering system chosen by the buyer, most commonly Mercell's Tarjouspalvelu or Cloudia; suppliers register free accounts there. Many buyers also publish smaller purchases below the thresholds in Hilma or on their own websites. Strong electronic identification is not generally required to submit a tender, but the e-tendering platform may ask for it.[4][13]

Procedures and thresholds

Above the EU thresholds, buyers use avoin menettely (open procedure), rajoitettu menettely (restricted procedure), neuvottelumenettely (competitive procedure with negotiation), kilpailullinen neuvottelumenettely (competitive dialogue) and innovaatiokumppanuus (innovation partnership). Between the national and EU thresholds, buyers can design their own procedure as long as they announce it in Hilma and respect equal treatment and transparency. Below the national thresholds the Act does not apply (pienhankinnat, small purchases), though buyers follow their own rules. Framework agreements (puitejärjestelyt) and dynamic purchasing systems are common, notably through Hansel. From 1 October 2026, buyers must in principle divide EU-level contracts into lots and cancel an open procedure that receives only one tender.[1][3][14]

Documents and language

Above the EU thresholds buyers must accept the European Single Procurement Document (ESPD), which is often built into the tender form. Finnish buyers commonly ask for evidence under the Contractor's Liability Act (tilaajavastuulaki): an extract from the trade register, a tax debt certificate or tax certificate, proof of pension and accident insurance, and the applicable collective agreement. Many suppliers share this information through the Luotettava Kumppani service. Buyers may also ask for financial statements, credit ratings, references and certificates. Tenders are usually submitted in Finnish or Swedish, the two official languages; some buyers accept English, especially for international tenders, and the documents say so.[1][15][16][17]

Deadlines, award and challenges

In an open procedure above the EU thresholds, the minimum time limit is 35 days from sending the notice, reduced by five days when tenders are submitted electronically, with shorter periods possible after a prior information notice or in urgent cases. Between the national and EU thresholds the buyer must allow a reasonable period. Contracts are awarded to the most economically advantageous tender, based on price, cost or best price-quality ratio. Above the EU thresholds there is a standstill period (odotusaika) of 14 days after the award decision is served. Bidders can request a procurement rectification (hankintaoikaisu) from the buyer or appeal to the Market Court (markkinaoikeus), usually within 14 days.[1][5][11]

How to win a tender in Finland

Finnish contracts go to the most economically advantageous tender, judged on price, cost or the best price-quality ratio. Many buyers fix the price or score quality with points against a price, so read the comparison criteria (vertailuperusteet) and mandatory requirements in the invitation to tender closely. Ask questions in Hilma or the buyer's tendering system before the question deadline; answers go to all bidders and become part of the tender documents. Finland's openness rules give you a strong way to know the buyer: procurement decisions become public when signed, and tenders become public once the contract is concluded, except trade secrets. Request earlier decisions, comparison memos and winning bids, and combine them with the notice history in Hilma and TED. Write in Finnish or Swedish unless English is accepted, answer every comparison criterion with concrete evidence, and keep your Contractor's Liability Act certificates current, as buyers often require them to be no older than three months. Bids fail on missing mandatory requirements, conditional offers, late submission and outdated certificates. The procurement decision must always be reasoned, and as a party you can see the comparison and, apart from trade secrets, competitors' bids. Use the 14-day standstill to request a free procurement rectification (hankintaoikaisu) or appeal to the Market Court.[8][9][10][11]

  1. Read the vertailuperusteet and every mandatory requirement before you start writing.
  2. Ask questions in Hilma or the tendering system before the deadline.
  3. Request the buyer's earlier procurement decisions and winning bids as public documents.
  4. Answer each comparison criterion with concrete evidence in the accepted language.
  5. Keep Contractor's Liability Act certificates no older than three months.
  6. Study the reasoned decision and use hankintaoikaisu within 14 days if needed.

Clarification round: Lisätietokysymykset (questions for additional information)

How contracts are awarded in Finland

of tenders are awarded on price alone
48%
bids per lot (median)
3
of lots receive a single bid
20%
of winners are SMEs
73%

Source: TED, 11,709 contract and award notices from 2025, calculated by TenderRender.

How TenderRender helps you in Finland

TenderRender does the work behind each step above. Your team checks and refines.

  1. 1

    Research the buyer

    Brings together the buyer's earlier awards, policies and contracts, so your bid fits this buyer's situation in Finland.

  2. 2

    Ask questions

    Finds unclear points and risks in the documents and drafts questions about them for the clarification round: Lisätietokysymykset (questions for additional information).

  3. 3

    Write per criterion

    Drafts a first version per award criterion, in the language of the tender, with citations to your own documents.

  4. 4

    Review

    Scores your bid per award criterion the way an evaluator would, with concrete improvements.

  5. 5

    Fill in forms

    Fills in the ESPD, price schedules, questionnaires and Excel annexes from your own data and earlier bids, with a source per answer.

  6. 6

    Submit

    Builds a checklist of everything you need to submit on Hilma and prepares the documents ready to sign.

Tender search covers the Netherlands, Belgium and Germany; in Finland you upload the documents from Hilma and TenderRender works with them the same way.

Teams writing or reviewing with TenderRender won 49% of their completed tenders. How this was calculated

Tips for bidders

Create a free search profile in Hilma, which covers all contracts above the national thresholds in one place. Collect your Contractor's Liability Act documents early, or join Luotettava Kumppani, because buyers often require certificates that are no older than three months. Check the language rules: Finnish is standard, but Swedish-speaking municipalities use Swedish, and English is sometimes accepted. Follow the 2026 reforms, as mandatory lot division from October 2026 should open more contracts to smaller firms. Read the award criteria closely, since Finnish buyers often use fixed price with quality points. If you see an error, use hankintaoikaisu first; it is free and faster than an appeal.[3][4][11][15]

Platforms in Finland

Share of the 6,620 TED notices from 2025 whose documents sit on this platform.

PublicCommercial

Frequently asked questions

Where are Finnish public tenders published?

In Hilma (hankintailmoitukset.fi), the free national notice service, for all procurements above the national thresholds. Contracts above the EU thresholds also appear on TED.[4][13]

Do I need to register?

Searching Hilma is free and needs no account. To download documents and submit a tender you register, free of charge, in the buyer's e-tendering system, such as Tarjouspalvelu or Cloudia.[4]

What are the thresholds in Finland?

National thresholds are €60,000 for supplies and services, €150,000 for works and €400,000 for social and health services. From 2026 the EU thresholds are €140,000 or €216,000 for supplies and services and €5,404,000 for works.[2][6]

Can foreign companies bid in Finland?

Yes. Companies from the EU, the EEA and countries covered by the WTO Government Procurement Agreement can bid on equal terms and may use equivalent documents from their home country.[1]

In which language must I submit my tender?

Usually in Finnish or Swedish. Some buyers accept English; the tender documents state which languages are allowed.[1]

How much time do I have to prepare a tender?

Above the EU thresholds an open procedure gives at least 35 days, or 30 days with electronic submission. Below the EU thresholds the buyer must allow a reasonable period.[1]

What is hankintaoikaisu?

Hankintaoikaisu is a request to the buyer to correct its own procurement decision. It is free and can be made alongside or before an appeal to the Market Court.[5][11]

Sources

  1. Hankintalaki 1397/2016, Finlex
  2. Hankinnat.fi: Kynnysarvot
  3. Hankinnat.fi: Eduskunta hyväksyi hankintalain muutokset (2026)
  4. Hilma, hankintailmoitukset.fi
  5. Markkinaoikeus (Market Court)
  6. Commission Delegated Regulation (EU) 2025/2152 (thresholds 2026-2027)
  7. Commission Delegated Regulation (EU) 2025/2150 (utilities thresholds 2026-2027)
  8. Hankintalaki 1397/2016, Finlex
  9. Hankinnat.fi – Hankinta-asiakirjojen julkisuus
  10. Hankinnat.fi – Hankintapäätös
  11. Hankinnat.fi – Hankintaoikaisu
  12. Hilma – Tarjouspyyntöön liittyvät kysymykset ja vastaukset
  13. TED – Tenders Electronic Daily (EU notices and award notices)
  14. Hansel - Etusivu
  15. Laki tilaajan selvitysvelvollisuudesta ja vastuusta ulkopuolista työvoimaa käytettäessä (1233/2006)
  16. Vastuu Group (Luotettava Kumppani)
  17. European single procurement document and eCertis
  18. kkv.fi

Checked on 15 October 2026. Made by TenderRender from official sources. Not legal advice: check the notice and documents of each tender.

Other countries in this region

All country guides
01 Proposals
Isometric grid illustration
200+
Proposal projects completed with TenderRender
02 Scale
Isometric grid illustration
100s
Pages of RFP documents shredded at once
03 First draft
Isometric grid illustration
15 min
To a first draft answering every question in a government RFP
[06] Information

Want to see what TenderRender can do with your next RFP? Schedule a demo.

Schedule a demo
Isometric grid illustration